Publicité
Les langues disponibles
Les langues disponibles
Disassembly and reassembly
5.2
Reassembly
(1)
Assemble shield by connecting male end through outside of arrow slot. Be sure the bent tabs are
facing outward.
(2)
Insert assembled shield into shell with fastened end towards front of shell.
(3)
Insert liner into shell. Be sure that front of liner marked "F" is towards front of shell.
(4)
Position suspension assembly into shell. Align four tabs over slots and push complete assembly into
shell. Push each tab into helmet slot until tabs are snug with shell edge.
US
6
Exploded view of Super V helmet
Suspension assembly
Foam liner
Plastic shield
Helmet shell
Fig. 1
Super V
Exploded view of Super V helmet
®
Helmet
Publicité
