Glossary
Bitstream
The digital form of multi-channel data (e.g.,
5.1 channel) before decording.
Decoder
A decoder restores the coded audio signals on
DVDs to normal. This is called decoding.
Dolby Digital
This is a method of coding digital signals
developed by Dolby Laboratories. Apart from
stereo (2-channel) audio, these signals can also
be multi-channel audio. A large amount of audio
information can be recorded on the disc using
this method.
Dolby Pro Logic
A surround system where a 4-channel audio
track is recorded as 2 channels and then is
restored to 4 channels for play. The surround
channel is monaural and can reproduce up to
7 kHz.
DTS (Digital Theater Systems)
This surround system is used in many movie
theaters around the world. There is good
separation between the channels, so realistic
sound effects are possible.
Dynamic range
Dynamic range is the difference between the
lowest level of sound that can be heard above
the noise of the equipment and the highest level
of sound before distortion occurs.
Film and video
DVD-Videos are recorded using either film or
video. Usually, film is recorded at 24 frames per
second, the rate movies are filmed at, while
video is recorded at 30 frames per second.
Product Service
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
1.
(a) The AC power supply cord or AC adaptor has been damaged; or
1.
(b) Objects or liquids have gotten into the unit; or
1.
(c) The unit has been exposed to rain; or
1.
(d) The unit does not operate normally or exhibits a marked change in performance; or
1.
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that
the unit is in proper working condition.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to "Customer Services Directory" on page 49.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505,
or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.
46
Frame still and field still
Frames are the still pictures that make moving
pictures. About thirty are shown each second. A
frame still may appear blurred but overall quality
is high.
Two fields appear alternately to make up one
frame. A field still is not blurred but picture
quality is lower.
Interlace and progressive output
NTSC, the video signal standard, has 480
interlaced (I) scan lines, whereas progressive
scanning uses twice the number of scan lines.
This is called 480P.
I/P/B
MPEG 2, the video compression standard
adopted for use with DVD-Video, codes frames
using these 3 picture types.
I: Intra coded picture
This picture has the best quality and is the
best to use when adjusting the picture.
P: Predictive coded picture
This picture is calculated based on past I or
P-pictures.
B: Bidirectionally-predictive coded picture
This picture is calculated by comparing past
and future I and P-pictures so it has the
lowest volume of information.
Linear PCM (pulse code modulation)
These are uncompressed digital signals, similar
to those found on CDs.
Playback control (PBC)
If a Video CD has playback control, you can
select scenes and information with menus.
Specifications
∫ Main unit
Discs played:
DVD-RAM (DVD-VR format)
DVD-Video, DVD-Audio
Music CD [CD-DA (CD-TEXT compatible)]
Video CD
CD-R/CD-RW [CD-DA (CD-TEXT compatible),
Video CD, MP3, WMA, JPEG,
HighMAT Level 2 (Audio and Image)]
DVD-R (finalized as DVD-Video)
SD played:
Media:
SD Memory Card
Image:
JPEG
Video:
MPEG4
Voice:
G.726
Audio:
MPEG2-AAC, MP3
(Sampling frequency:
32 kHz, 44.1 kHz, 48 kHz)
Signal system:
NTSC
9q α-Si, TFT wide-screen LCD
LCD screen:
(VGA 800k480kRGB pixels)
Composite-video output/input:
Output/input level:
1 Vp-p (75 ≠)
Output/input terminal:
Mini-jack
Number of terminals: 1 system (output/input)
Audio output/input:
Output/input level:
1.5 Vrms
(1 kHz, 0 dB, 10 k≠)
Output/input terminal:
Stereo mini-jack
Number of terminals: 1 system (output/input)
Audio performance:
(1) Frequency response:
(1)
≥DVD (linear audio):
4 Hz–22 kHz (48 kHz sampling)
4 Hz–44 kHz (96 kHz sampling)
(1)
≥DVD-Audio:
4 Hz–88 kHz (192 kHz sampling)
(1)
≥CD audio:
4 Hz–20 kHz
(2) S/N:
(1)
≥CD audio:
115 dB
(3) Dynamic range:
(1)
≥DVD (linear audio):
98 dB
(1)
≥CD audio:
97 dB
(4) Total harmonic distortion:
(1)
≥CD audio:
0.008 %
Digital audio output:
Output terminal:
Mini optical terminal
Number of terminals:
1 system
(also used for audio output/input)
Built-in speakers:
1 Wi1 W stereo output
Pickup:
Wave length:
658 nm/790 nm
Laser power:
CLASS II/CLASS I
Power supply:
DC 9 V (DC IN terminal)/
DC 7.2 V (Battery terminal)
Power consumption
(using included AC adaptor):
17 W (Unit only: 13 W)
Recharging 13 W
Battery pack CGR-H604 (lithium ion):
Voltage:
7.2 V
Capacity:
3000 mAh
Dimensions (excluding protrusions):
232 (W)k173.5 (D)k30.7
(H) mm
§
[9
2
⁄
q (W)k6
27
⁄
q (D)k1
7
⁄
q (H)]
16
32
32
24.6 mm (
31
⁄
q) at lowest point
§
32
Mass:
1200 g (42.3 oz.)
∫ Multi cradle
Composite-video output:
Output level:
1 Vp-p (75 ≠)
Output terminal:
RCA pin-jack
Number of terminals:
1 system
S-video output:
Y output level:
1 Vp-p (75 ≠)
C output level:
0.286 Vp-p (75 ≠)
Output terminal:
S-video jack
Number of terminals:
1 system
Component-video output
(Progressive compatible):
Y output level:
1 Vp-p (75 ≠)
P
output level:
0.525 Vp-p (75 ≠)
B
P
output level:
0.525 Vp-p (75 ≠)
R
Output terminal:
RCA pin-jack
Number of terminals:
1 system
Audio output:
Output level:
1.5 Vrms (1 kHz, 0 dB, 10 k≠)
Output terminal:
RCA pin-jack
Number of terminals:
5.1 ch discreet output
1 system
Included speakers:
2 Wi2 W stereo output
Power supply:
DC 9 V (DC IN terminal)
Power consumption
(using included AC adaptor):
27 W (when connected
to main unit and playing)
Dimensions (excluding protrusions):
238 (W)k182 (D)k38 (H) mm
[9
6
⁄
q (W)k7
3
⁄
q (D)k1
1
⁄
q (H)]
16
16
2
Mass:
680 g (24.0 oz)
∫ Common
Operating temperature range:
i5 to i35 oC (i41 to i95 oF)
Operating humidity range:
10–80 % RH (no condensation)
AC adaptor:
Power source:
AC 100–240 V, 50/60 Hz
Power consumption:
38 W
DC output:
9 V, 2500 mA
Note
Specifications are subject to change without
notice.
Mass and dimensions are approximate.
Power consumption in standby mode
(using included AC adaptor):
Main unit:
0.8 W
Multi cradle:
0.9 W (when connected
to main unit)
47