Connecting A Recording Device; Using The Aux In Input - Bose ACOUSTIC WAVE MUSIC SYSTEM II Notice D'utilisation

Connecting Other Equipment

Connecting a recording device

Using the AUX IN input

18
To record audio programming from your system, you can connect a recording device to the
HEADPHONES jack.
1. In the setup menu, change the HEADPHONES JACK option from HEADPHONES to LINE
OUTPUT. See "Changing system settings" on page 20 for instructions.
2. Plug the end of the supplied audio cable that has
the 3.5 mm 1 " male stereo plug into the
( )
/
8
HEADPHONES jack on the back of the Acoustic
®
Wave music system II.
3. Plug the other end of the cable into the recording
device.
When using a TV, VCR, computer, video game or MP3 player, you can enhance your listening
experience by playing the audio output of these devices through the AUX IN input on your
Acoustic Wave ® music system II.
Connecting the audio output of a device to your Acoustic Wave
the following types of stereo audio cables:
• Dual RCA male to 3.5 mm
audio cable (supplied)
• Dual RCA male to Dual RCA male
audio cable (not supplied)
To connect a device, like an MP3 player, to your music system:
1. Connect the dual RCA plugs of the appropriate stereo cable to the AUX IN connectors
on the rear panel of your Acoustic Wave
2. Connect the other end of the cable to the audio output of the device.
3. Turn on the connected device, and then turn on your Acoustic Wave
4. Press AUX.
" male
( 1 )
/
8
® music system II (Figure 19).
"
3.5 mm ( 1 )
/
8
male stereo plug
® music system II requires one of
®
music system II.