Listening To Fm Or Am Radio; Selecting Fm Or Am Radio; Tuning The Radio - Bose ACOUSTIC WAVE MUSIC SYSTEM II Notice D'utilisation

Masquer les pouces Voir aussi pour ACOUSTIC WAVE MUSIC SYSTEM II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Listening to FM or AM Radio

Selecting FM or AM radio

Figure 13
Sample FM radio display

Tuning the radio

Figure 14
Sample tuning display
14
Press FM or AM to select FM or AM radio. This action also turns on the system if it is off. The
last radio station selected will be heard.
Selected preset station
FM source indicator
Press FM or AM to select the FM or AM tuner.
When you tune to a radio station, the frequency appears in the center of the display while you
are tuning (Figure 14).
FM source indicator
Station frequency
Press Seek/Track
to find a lower-frequency station with a strong signal; press
Seek/Track
to find a higher-frequency station with a strong signal.
Press Tune/MP3 < to manually tune to a lower frequency; press Tune/MP3 > to manually
tune to a higher frequency.
Press and hold Tune/MP3 < to move rapidly down through the frequency band; press and
hold Tune/MP3 > to move rapidly up through the frequency band.
Note: If AM reception is weak, rotate the system to improve AM reception. If FM reception is
weak, make sure the telescoping antenna is fully extended. If FM reception is still weak, try install-
ing an external FM antenna. See "Connecting an external FM antenna" on page 16.
Station frequency
Mode

Publicité

Table des Matières
loading

Table des Matières