Connecting To Ac Power - Bose L1 II Notice D'utilisation

English English Dansk Deutsch Español Dansk

Connecting to AC power

Figure 4
Power connections
Français Deutsch Italiano Nederlands Español
1. Make sure the power switch is off.
2. Plug one end of the AC power cord into the AC Mains connector on the power stand.
3. Plug the other end into a live AC (mains) receptacle (Figure 4).
Power switch
AC Mains
CAUTION: Bose recommends using a quality surge suppressor on all electronic equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor, which can eliminate the vast majority of failures attributed to surges, may be pur-
chased at electronics stores.
Français Svenska Italiano
CAUTION: DO NOT block or cover
the handle opening, which is part of
the ventilation system. Doing so can
cause the L1
overheat, switch to a thermal protec-
tion mode, and temporarily turn off.
Nederlands Svenska
S S
YSTEM
® model II system to

ETUP
11