Rear Panel - Blackmagic Design Blackmagic Studio Cameras Manuel D'installation Et D'utilisation

Right Panel
6 Optical Input/Output
Optical input and output allows cable runs of up to 28 miles when the optional
SFP optical module is fitted.
7 SDI Out
SDI output for connecting to a switcher or other device.
8 SDI In
SDI input allows the camera operator to view the Program (PGM) output.
9 Reference Input
Allows multiple cameras to be genlocked to a blackburst or tri-level reference signal.
10 Power
12 – 24V power input for power supply and battery charging, where applicable. Refer to
the 'Blackmagic Studio Camera - right side' section in this manual for more details.
6
7
8
9
10

Rear Panel

11 10" LCD
Monitor live camera output or program output, or view the menu. See the 'monitoring
settings' in this manual for more details.
12 Rear Tally Light
When lit, it indicates to the camera operator that their camera is currently live.
13 Focus Button
Press once to auto focus or twice to display focus peaking on the LCD.
14 Iris Button
Press once for auto exposure.
15 Push To Talk Button (PTT)
Press and HOLD to talk. Press twice in quick succession for hands free communication.
Press again to revert to the default behavior.
16 Program (PGM) Button
Press to toggle between live camera output and program output from a switcher
control room.
17 Look Up Table (LUT) Button
Currently not implemented.
18 Menu Navigation Buttons
Navigate the menu on the LCD.
11
OPTICAL OUT
OPTICAL IN
SDI OUT
SDI IN
REF
15
13 14
12V
FOCUS IRIS PTT
12
17
16 18 19 18
PGM LUT SET
20 21 22
DISPLAY MENU
FOCUS IRIS PTT
Camera Features 9
PGM LUT