Using Camera Control - Blackmagic Design Blackmagic Studio Cameras Manuel D'installation Et D'utilisation

Using Camera Control

Launch ATEM Software Control and click on the Camera button located at the bottom of the
software window. You'll see a row of labeled camera controllers containing tools to adjust and
refine each camera's image. The controllers are easy to use. Simply click the buttons using your
mouse, or click and drag to adjust.
Camera Control Selection
The button row at the top of the camera control page lets you select the camera
number you would like to control. If you have more cameras that fit onto the window
size, or you are running the color corrector window, then you can use these buttons to
select between which camera you would like to control. If you are using an Aux output
for monitoring your camera control, pushing these buttons to change the camera to
control will also send that camera's video output to the Aux output. Your chosen Aux
output for camera control can be set in the general switcher settings.
Channel Status
The channel status at the top of each camera controller displays the camera label, On
Air indicator and lock button. Press the lock button to lock all the controls for a specific
camera. When on air, the channel status illuminates red and displays the On Air alert.
Color Wheel
The color wheel is a powerful feature of the DaVinci Resolve color corrector and used to make
color adjustments to each YRGB channel's lift, gamma and gain settings. You can select which
setting to adjust by clicking on the three selection buttons above the color wheel.
Master Wheel
Use the master wheel below the color wheel to make contrast adjustments to all YRGB
channels at once, or luminance only for each lift, gamma or gain setting.
Camera Settings
The camera settings button near the bottom left of the master wheel lets you turn on the color
bars feature in Blackmagic Studio Cameras, Micro Studio Cameras and URSA mini, plus adjust
detail settings for each camera's picture signal.
Each camera controller
displays the channel
status so you know which
camera is on air. Use the
color wheels to adjust
each YRGB channel's lift,
gamma and gain settings.
Using ATEM Software Control 37