Blackmagic Design Blackmagic Studio Cameras Manuel D'installation Et D'utilisation page 23

This setting toggles the histogram on and off. When on, this will appear in the bottom right
corner of an attached monitor when 'HDMI overlays' are set to on.
Monitoring settings - Blackmagic Micro Studio Camera 4K.
Audio
The audio meter represents the current volume of left and right audio channels in two horizontal
bars. Left is on top, right is on the bottom. If your audio levels rise too high, your audio peaks
can be clipped and you will hear distortion in your audio. To avoid this, adjust the audio gain on
your camera until your audio levels stay within safe levels.
This setting toggles the audio meter on and off. When on, this will appear in the bottom left
corner of an attached monitor when 'HDMI overlay' are set to on.
HDMI Overlays
This setting is only available on Micro Studio Camera 4K. When set to 'on,' HDMI video output
will include frame guides and information about the camera settings and identity, as well
as any meters enabled via the 'HDMI meters' setting.
Brightness
Move the slider icon left or right to adjust brightness settings for the LCD.
The default setting is 60%.
Zebra
Blackmagic Cameras have a zebra feature which gives an indication of exposure levels.
Diagonal lines will appear across any part of the video that exceeds the zebra exposure level.
Turn zebra on and select the desired zebra warning level by using the left and right arrows.
The default setting is medium.
Focus Peaking
Allows you to change the level of focus peaking. The settings include: off, low, medium and
high. Adjust this setting when you are using a very sharp lens and the peaking covers the entire
image. The default setting is medium.
Front Tally Brightness
Changes the brightness of the front tally light. Settings include: off, low, medium and high.
The default setting is medium.
Settings 23