Conduit Locations And Sizing - Franklin Electric SUBDRIVE CONNECT 50 Manuel Du Propriétaire

ELECTRICAL INSTALLATION
Wiring Guidelines

Conduit Locations and Sizing

Use appropriate strain relief or conduit connectors.
1. Incoming power supply—Hole = 0.88 in. (22.2 mm), Knockout = 1.13 in. (28.6 mm)
2. Power output to motor—Hole = 1.13 in (28.6 mm), Knockout = 1.37 in. (34.9 mm)
3. Control wiring (transducer/sensor) input—Hole = 0.5 in. (12.7 mm)
4. Optional cabling for auxiliary controls—Knockout = 0.88 in. (22.2 mm)
19