Specifications; Subdrive 15 Connect/Subdrive 20 Connect - Franklin Electric SUBDRIVE CONNECT 50 Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SPECIFICATIONS

SubDrive 15 Connect/SubDrive 20 Connect

NEMA 3R
Model
(indoor/outdoor)
Voltage
Phase In
Frequency
Current (max)
Input from
Power Source
Power Factor
Power (idle)
Power (max)
Wire Gauge Size(s) Refer to
Voltage
Phase Out
Frequency Range
Output to
Motor
Current (max)
Wire Gage Size(s)
Factory Preset
Pressure
Setting
Adjustment Range
Temperature
Operating
(at 230 VAC input)
Conditions*
Relative Humidity
Temperature
Storage**
Shelf Life
Dimensions
NEMA 3R
and Weight
* Operating temperature is specified at full output power when installed as recommended. Refer to
Temperature Foldback" on page
** Shelf life can be extended for one year by powering the drive for 60 minutes with no load.
SubDrive 15
5870205103C
208/230 ± 10% VAC
Single-Phase
60/50 Hz
12 A
~ 0.95
4 Watts
2.5 kW
"Input Wire and Fuse Sizing" on page 18
272 VAC Maximum
Single-Phase (3-Wire) OR Three-Phase
30-78 Hz: 1/2-rated pump (Three-Phase)
30-70 Hz: 2/3 or 3/4-rated pump (Three-Phase)
30-60 Hz: Matched pump (Three-Phase)
30-63 Hz (Single-Phase Motors)
5.9 A / phase
"Output (Motor) Wire Sizing" on
Refer to
page 18
.
50 psi (3.4 bar)
Transducer: 5-95 psi (0.3-6.6 bar)
Pressure Sensor: 25-80 psi (1.7-5.5 bar)
–13 °F to 122 °F (–25 °C to 50 °C)
20-95%, non-condensing
–13 °F to 149 °F (–25 °C to 65 °C)
1.5 Years
9-3/4" x 19-3/4" x 5-1/4" : 26 lbs
(25 x 50 x 13 cm) : (11.8 kg)
30.
SubDrive 15 Connect/SubDrive 20 Connect
SubDrive 20
5870205313C
208/230 ± 10% VAC
Single-Phase
60/50 Hz
17.3 A
~ 0.95
5 Watts
4.2 kW
"Input Wire and Fuse Sizing" on page 18
. Refer to
272 VAC Maximum
Single-Phase (3-Wire) OR Three-Phase
30-78 Hz: 1/2-rated pump (Three-Phase)
30-70 Hz: 2/3 or 3/4-rated pump (Three-Phase)
30-60 Hz: Matched pump (Three-Phase)
30-63 Hz (Single-Phase Motors)
8.1 A / phase
"Output (Motor) Wire Sizing" on
Refer to
page 18
.
50 psi (3.4 bar)
Transducer: 5-95 psi (0.3-6.6 bar)
Pressure Sensor: 25-80 psi (1.7-5.5 bar)
–13 °F to 122 °F (–25 °C to 50 °C)
20-95%, non-condensing
–13 °F to 149 °F (–25 °C to 65 °C)
1.5 Years
9.75" x 16.9" x 5-1/4" : 19 lbs
(25 x 43 x 13 cm) : (8.6 kg)
"Over
SPECIFICATIONS
.
47

Publicité

Table des Matières
loading

Table des Matières