Appendix: Installation Of The Rear-View Mirrors - Segway B Serie Manuel De L'utilisateur

9. SEGWAY reserves the right to make changes to the vehicle, release firmware updates, and
update this manual at any time. Improvements and changes to this user manual necessitated by
typographical errors, inaccuracies of current information, or improvements to programs and/or
equipment, may be made by SEGWAY at any time and without notice. Such changes will, however, be
incorporated into new editions of this user manual. All illustrations are for illustration purposes only
and may not accurately depict the actual device. Actual product and functions may vary. Due to the
update of the vehicle, there may be some deviations in color, appearance and other aspects between
the vehicle listed in this manual and the vehicle you purchased. Please refer to the actual product.
10. This document should be considered as a permanent part of the vehicle and it shall be provided to
the user together with the vehicle all the time.
Thank you again for choosing SEGWAY eMoped B110S!
25

Appendix: Installation of the Rear-view Mirrors

a. Align the mirror for the installation position
on the handle bar, rotate and tighten the
support bolt in the clock wise direction.
c. Use an open-end wrench to tighten both
bolts to securely fasten the mirror.
b. Rotate the mirror and the (upper)
counter bolt in the counter-clockwise
direction.
26