Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Utility hook
USB port
Statutory plate (at the bottom)
Rear wheel

Dashboard

Ready indicator
Speed display
Direction indicator
Battery charge
Vehicle failure
E (battery level is empty)
Battery high temperature warning
Status indicator (left)
Mileage
09
Throttle
Dashboard
Rear rack
Rear direction indicator lamp
Tail light
Rear registration plate lamp/
Rear reflector
Registration plate
Rear fender
Battery level
Passing beam headlamp
Direction indicator
Cruise control
Bluetooth
F (battery level is full)
Battery low temperature warning
Status indicator (right)
Riding Status Ring Colors and Meanings
Green: Ready to go
Blue:
Power assist mode
1
Cruise mode
2
*You can enable and disable the Power
assist mode via the Segway-Ninebot app.
Symbol
Symbol Name
Description
READY indicator When READY is on, is good to go.
Passing beam
Passing beam symbol is on when the main
headlamp
headlamp is switched on.
1. Indicates the current speed.
Speed display
2. Displays the error code when there is a malfunction.
Mileage
Indicates the total distance traveled.
1. Flashes when the left/right turn button is
pressed.
Direction indicator
2. When both direction indicators (left and right)
(Left/Right)
light up simultaneously with the warning
indicator, the vehicle is in a warning state.
The battery power is low and needs charging
Battery charge
when it lights up.
Cruise control
The vehicle is in cruise control when it lights up.
Vehicle failure
When the icon flashes, has a malfunction.
Bluetooth
The vehicle is connected to a phone when it lights up.
Battery high
The indicator lights up when the battery
temperature
temperature is higher than 40 °C.
warning
Battery low
The indicator lights up when the battery
temperature
temperature is lower than 5 °C.
warning
Battery level
Bars of remaining battery.
Orange: Standby, unable
Red: Error
to ride
Notes
When the kickstand is in the up position and a person
sits on the seat, press the Auto Key, and
The light is on by default when is turned on.
: Metric unit
: Metric unit
1. When toggled
(on left combination switch) to the
left/right, the left/right turn signal is on. Press
to turn off the turn signal.
2. When
(on right combination switch) is pressed,
the left/right turn signals and this indicator will
flash to alert pedestrians and other vehicles.
Press
again to cancel the warning.
When the battery is low, this indicator lights up and
the battery level bar on the dashboard flashes.
While riding, press
(on the right combination
switch) to keep riding at the current vehicle speed;
Turn the throttle or brake lever to exit cruise control.
is on.
10

Publicité

Table des Matières
loading

Table des Matières