road conditions when riding the product. For instance, you shall avoid speeding, overloading or
performing stunts of any kind. Do not try to touch the tires with your hands or feet when riding. Do not
carry people on the rear rack. One rider only.
5. The user shall check and obey the local laws or regulations over the product. It is the sole user's
responsibility that he/she shall ride, use and/or dispose of the product in compliance with the
law. The law and regulations may be different in different jurisdictions. Apart from the others, such laws
and regulation may include:
(1) A helmet may be legally required by local law or regulation in your jurisdiction.
(2) Vehicle registration and a license plate may be legally required by local law or regulation in your area.
(3) Your eMoped may not be allowed to be driven in motorway or highway.
You may obtain more information related to legal requirements on eMoped from your local government.
6. A consumer shall immediately check whether the product and its accessories are in good condition
upon receipt of the product.
7. All the separate components and part of the products must be properly installed per the User Manual.
Inappropriate installation and/or assembly may significantly increase the risk of loss of control,
product failure, collisions and falls. The product may contain removable components and small parts.
Please keep them out of the reach of children to avoid choking hazard.
8. Do not dispose of this product in a landfill, by incineration, or by mixing with household trash. Serious
danger/ injury can occur because of the electrical components and the battery. For information about
battery and electrical waste, please contact your household waste disposal service, your local or
regional waste management office, or your point-of-sale. The user shall not use any non-original
accessories, or dismantle or modify the product without authorization. All damages, injuries (including
bodily injury and death) and damages to property arising therefrom will be your sole responsibility and
risk.
9. SEGWAY reserves the right to make changes to the product, release firmware updates, and
update this manual at any time. Improvements and changes to this user manual necessitated by
typographical errors, inaccuracies of current information, or improvements to programs and/or
equipment, may be made by SEGWAY at any time and without notice. Such changes will, however, be
incorporated into new editions of this user manual. All illustrations are for illustration purposes only
and may not accurately depict the actual device. Actual product and functions may vary. Due to the
update of the product, there may be some deviations in color, appearance and other aspects between
the product listed in this manual and the product you purchased. Please refer to the actual product.
10. This document should be considered as a permanent part of the product and it shall be provided to
the user together with the product all the time.
Thank you again for choosing SEGWAY eMoped C!
25
Appendix: Installation of the Rear-view Mirrors
a. Take off the upper nut on the rear-view
mirror.
c. Insert the mirror into the lower nut and rotate counter-clockwise to a proper position. Then rotate
down the upper nut.
d. Use the open-end wrench to turn the two nuts in the opposite direction so that they stay in close
contact. Then slide down the protective cap to cover the nuts.
b. Use the open-end wrench to mount the nut
onto the rear-view mirror installation bracket.
26