Global Mode; Scale Page Modified; New Locks Added; Balance Slider As The Acc/Seq-Rt Volume - Korg Pa2Xpro Mode D'emploi

12 KORG Pa2X – Operating System release 2.0

Global Mode

Global Mode
Scale page modified
The Global > General Controls > Scale page has been modified,
to let the user select and edit SC Presets.

New Locks added

Two new Locks have been added to the Global > General Con-
trols > Lock page.
Perf M.Transpose
When closed, this lock prevents a Performance
change to modify the Master Transpose. When
open, changing a Performance may also change
the Master Transpose.
Hint: In order to avoid having the Master Trans-
pose setting change when selecting a different Style,
use the general Master Transpose Lock (the first
parameter in this page).
Note: When the Master Transpose Lock is closed,
this parameter has no effect. However, the Master
Transpose Lock also locks the Performance Trans-
pose.
STS SubScale/Quarter Tone
When closed, this lock prevents an STS change to
modify the SubScale/Quarter Tone settings,
allowing for changing sounds and effects but not
the scale. When open, changing an STS may also
change these settings.

Balance slider as the Acc/Seq-RT Volume

A new setting has been added, to choose how the BALANCE
slider should work.
Balance Slider
The BALANCE slider can either be used to mix between the Key-
board and Accompaniment/Song tracks, or to control the
Accompaniment/Song Volume without changing the Keyboard
tracks. This is always a relative control, whose effective maxi-
mum value is determined by the MASTER VOLUME slider posi-
tion.
Note: The BALANCE slider only works in Style Play and Song Play
modes. It does not work in Sequencer or Sound mode.
Acc/Sng - RT/Kbd Balance
While in Style Play and Song Play mode, the
BALANCE slider balances the volume of the Key-
board (RT/Kbd) tracks, against the Style (Accom-
paniment), Pad and Song tracks.
Acc/Sng Volume
While in Style Play and Song Play mode, the
BALANCE slider controls the volume of the Style
(Accompaniment), Pad and Song tracks.

Pedal/Footswitch Calibration

The Global > Controllers > Pedal/Switch page has been modi-
fied, due to a new way of choosing the pedal/footswitch polarity,
now including calibration.
Gbl