ENBIO S Mode D'emploi page 58

Info
„Aborted by user"
„Vacuum test failed"
„No USB memory"
„Equalizing pressure"
Sample error codes are presented below.
Process aborted by the user.
Screens displayed alternately: equalising pressure, please stand by.
57
Process aborted by the
user. Non-sterile insert
if interrupted during or
before the sterilization
process.
Vacuum leak test error Contact the service
No USB drive Check the USB port,
insert the drive.
Contact the service
Pressure during The message occurs
stoppage. Equal to in specific cases as
atmospheric pressure a result of natural
processes.
In the case of a
frequent appearance
of a message, contact
the service.
The process has not been completed
correctly. The load is not sterile.
Vacuum leak program error. Error
screen: you can continue working.
Error no. 5
Pressure in the process chamber too
low.
The process has not been completed.
The load is not sterile. Equalising pres-
sure in the process chamber.