Cleaning and maintenance
Switching off and storing the cooler
If you do not intend to use the cooler for a long time, proceed as follows:
➤ Switch the cooler off.
➤ Disconnect the power supply or the hose line to the gas cylinder.
➤ Clean the cooler (see chapter "Cleaning and maintenance" on page 16).
➤ Leave the cover slightly open.
This prevents odours from building up.
7
Cleaning and maintenance
!
WARNING!
Before cleaning the cooler disconnect the hose line.
!
WARNING!
Always disconnect the device from the mains before you clean
and service it.
A
NOTICE! Risk of damage
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
8
Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
16
All manuals and user guides at all-guides.com
A40
EN