3
USAGE CONDITIONS
WARNING!
3.1 WORK AREA
KEEP your work area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
KEEP bystanders, children, and visitors away while operating a power tool.
Machine must be operated by reliable operators who read and understand the operation
manual of age above 18
3.2 ELECTRICAL SAFETY
GROUNDED TOOLS MUST BE PLUGGED INTO an outlet properly installed and grounded in
accordance with all codes and ordinances.
NEVER REMOVE the grounding prong or modify the plug in any away.
DO NOT USE any adaptor plugs.
CHECK with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
AVOID body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
en
DON'T EXPOSE power tools to rain or wet conditions.
DO NOT ABUSE the cord.
NEVER USE the cord to carry the tool.
NEVER PULL the plug from an outlet.
KEEP cord away from heat, oil, sharp edges or moving parts.
REPLACE damaged cords immediately.
WHEN OPERATING a power tool outside, use an outdoor extension cord marked "H07RN-F", "W-A"
or "W". These cords are rated for outdoor use and reduce the risk of electric shock.
3.3 PERSONAL SAFETY
STAY ALERT, watch what you are doing and use common sense when operating a power tool.
DO NOT USE TOOL while tired or under the influence of drugs, alcohol, or medication.
DRESS PROPERLY. DO NOT WEAR loose clothing or jewellery.
CONTAIN long hair.
KEEP your hair, clothing, and gloves away from moving parts.
AVOID accidental starting.
BE SURE that the switch is in the off (0) position before plugging the tool into the mains.
REMOVE adjusting keys or switches before turning the tool on.
DO NOT EXCEED the limit of your strength.
KEEP proper footing and balance at all times.
USE safety equipment.
Always WEAR eye protection.
MONO-PHASE AND THREE-PHASE EXTERNAL VIBRATORS
VET VEM
4
Read and understand all instruction.