Picture Settings; Camera Settings - ABUS Security-Center TV7218 Instructions D'installation

"url" http://"Network Camera"/setup/video.vspx
"Network Camera" is the domain name or original IP address of the security network camera.

Picture settings

Camera settings

Day/Night function
The IR dome network camera offers built-in IR LEDs, which will be activated below an illumination of 2 Lux.
This is automatically applied by the camera module.
The IR dome network camera TV7219 additionally offers an IR cut filter which filters the IR light in day mode.
In night mode this filter will be automatically removed, controlled by the camera module.
Click
which you can set the
and the
–5 to +5. To check your settings, click
the picture parameters, click
changes, click
Click on "Camera settings" button, the Camera settings window will
pop up.
"BLC" back light compensation – enable this will help to identify.
In the Camera Settings window, click "Preview" to see the effect of
changing the options. Click on "Save" to set the Camera settings.
Click "Restore" to recall the original settings without incorporating the
changes.
35
to open another window in
,
of the video picture. Each field has levels from
.
,
. To save
. To discard your