(r/w)
udpslowstart
Group: Audio
NAME
VALUE
bitrate
8000
(r/w)
24000
32000
transfermode
0
(r/w)
1
2
3
4
sendclientaudio
0
(r/w)
1
source (r/w)
0
1
lowbandwidth (r/w) 0
1
enableaec (r/w)
0
1
Group: Image
NAME
VALUE
brightness
<-5 ~ 5>
(r/w)
saturation
<-5 ~ 5>
(r/w)
contrast
<-5 ~ 5>
(r/w)
hue
<-5 ~ 5>
(r/w)
mode
Preview
(w)
Restore
Save
Group: CCD
NAME
enableblc
(r/w)
mode
(w)
Group: Motion
NAME
0
1
0
VALUE
0
1
1
Preview
Restore
Save
VALUE
Do not overlay time stamp on video
Enable udp slow start
Disable udp slow start
DESCRIPTION
set bitrate to 8K bps
set bitrate to 24K bps
set bitrate to 32K bps
Full-duplex (Talk & Listen simultaneously)
Half-duplex (Talk or Listen, not at the same time)
Simplex – Talk only
Simplex – Listen only
Disable audio
Do not send audio from active client to all other clients
Send audio from active client to all other clients (only
possible in Half-duplex)
Use external microphone in
Use build microphone
Disable low bandwidth environment support
Improve in low bandwidth environment
Disable
Enable
DESCRIPTION
Adjust brightness of image according to mode
settings. <0>
Adjust saturation of image according to mode
settings. <0>
Adjust contrast of image according to mode
settings. <0>
Adjust hue of image according to mode settings.
<0>
Apply the parameter of image but not save
Restore the last saved image parameters
Directly save the adjust image parameters
DESCRIPTION
Turn off backlight compensation
Turn on backlight compensation
Set auto gain control to MAX level
Apply the parameter of image but not save
Restore the last saved image parameters
Directly save the adjust image parameters
DESCRIPTION
50