Mail & Ftp - ABUS Security-Center TV7218 Instructions D'installation

Mail & FTP
SMTP
If the SMTP server supports SMTP authentication, the user has to enter a valid user name and password to
send an e-mail via the server.
„1st SMTP mail server" Domain name or IP address of the external e-mail server.
„1st SMTP account name" Permitted user name for external e-mail server.
„1st SMTP password" Permitted password for external e-mail server.
„1st recipient email address" E-mail address of recipients of snapshots or of the log file. Two or more
recipient names must be separated by semicolons (;).
„2nd SMTP mail server" Domain name or IP address of another e-mail server (backup) if the first server
cannot be reached.
„2nd SMTP account name" Permitted user name for backup e-mail server.
„2nd SMPT password" Permitted password for backup e-mail server.
„2nd recipient email address" E-mail address of recipient for backup server.
„Sender email address" E-mail address of sender.
FTP
„Built-in FTP server port" This port can be different from the standard port 21. The user can set this
parameter to 1 to 65535. If this parameter is changed, the server port of the connection must be changed
accordingly by the external FTP client program.
„1st FTP server" Domain name or IP address of the external FTP server. The following user settings must
be correctly configured for remote access.
"1st FTP server port" The port to access the external FTP server.
„1st FTP server user name" Permitted user name for external FTP server.
„1st FTP server password" Permitted password for external FTP server.
"1st FTP remote folder" Permitted folder for external FTP server. The character set must match that of the
external FTP server. If the virtual path is not mapped, some FTP servers cannot accept a slash in front of the
path name. For details, see the instructions for the external FTP server. The folder privilege must be open for
uploading.
„1st FTP passive mode" The security network camera is in the network protected by a firewall. A data
connection for FTP may not be permitted. If you select passive mode, the FTP can get round this restriction
and permit snapshots, so that the upload can continue. If you select passive mode, the security network
camera can automatically try active mode if the external FTP server does not support passive mode.
„2nd FTP server" Domain name or IP address of the external FTP server.
"2nd FTP server port" The port to access the external FTP server.
„2nd FTP user name" Permitted user name for backup FTP server.
„2nd FTP password" Permitted password for backup FTP server.
„2nd FTP remote folder" Permitted folder for backup FTP server.
„2nd FTP passive mode" Setting of passive mode for the backup FTP server.
32