Integrated Video Sensor - ABUS Security-Center TV7218 Instructions D'installation

Integrated video sensor

If no external sensor is available, the administrator can use the integrated motion sensor to monitor
movement and send snapshots by e-mail for inspection.
1. In the left column, click "Motion detection".
2. Enable "Enable Motion detection".
3. Click to keep a new window ready for supervising the video.
4. Enter a new name to identify the new window.
5. Click a corner of the window, keep the mouse button pressed, and adjust the size of the window for
motion detection or move the window.
6. You can fine-tune the camera with "Sensitivity" and "Percentage". The higher the "Sensitivity", the
smaller the changes that can be detected in the picture sequence. The lower the "Percentage", the smaller
the objects that can be differentiated in a picture.
7. Click to activate the bar graph (activity). Green means that the motion sequence is lower than
the level set by the administrator, and red means that the motion sensor has been triggered.
8. In the left column, click "Application".
9. Under Event operation/Trigger condition/Detect motion in, select the window name.
10. Enable "Upload snapshots while motion detected" to transfer the snapshots by e-mail.
11. Enable "Send snapshots by email".
12. Click to activate the settings (activity).
26