System; Security - ABUS Security-Center TV7218 Instructions D'installation

System

„Host name" The text represents the title of the homepage.
„Turn off the LED indicator" Select this option to switch of the LED on the rear of the camera. This
prevents other persons knowing that the camera is in use.
„Keep current date and time" Click this option to keep the current date and time of the security network
camera. An internal realtime clock stores the date and time after the system is switched off.
„Sync with computer time" Synchronises the date and time of the security network camera with the local
computer. The read-only date and time of the PC are displayed following updating.
„Manual" Sets the date and time according to the administrator's input. Note the date/time format when
entering in the respective fields.
„Automatic" Synchronises the date and time with the NTP server via the Internet every time the security
network camera is switched on. This is not possible if the respective time server cannot be reached.
„NTP server" Assigns the IP address or the domain name of the time server. If you leave this text box
empty, the security network camera is connected to the default time servers.
„Time zone" Sets the time according to the time server for local settings.
"Update interval" Select hourly, daily, weekly or monthly update with the time on the NTP server.
Don't forget to click to make your settings take effect; otherwise, the time is not synchronised.

Security

„Root password" For changing the administrator password by entering a new password. For security
reasons, the passwords entered are represented by asterisks. After is clicked, the web browser
prompts the administrator to enter the new password for accessing the network camera.
„Add user" Enter the new user name and password and click . The new user is displayed on the list
of user names. Up to twenty user accounts can be defined. You can assign "I/O access", "Talk" and
"Listen" to every user.
„Delete user" Open the list of user names, select a user and click to delete this user.
"I/O access" Allows user to control the DO (Relay output) and get status of the DI (Digital input).
"Talk" Allows user to talk to the server
"Listen" Allows user to listen from the server.
"Delete user" Pull down the user list to find the user's name and press "Delete" to complete.
"Edit user" Pull down the user list to find the user's name and press "Edit" to edit the user's password and
privileges.
"url" http://"Network Camera"/setup/edituser.vspx
"Network Camera" is the domain name or original IP address of the security network camera.
29