The Psc-Z Display And Keypad - Hunter PSC-Z Serie Manuel D'utilisation Et De Programmation

The PSC-Z Display ...........................................
The PSC-Z's clear, easy-to-read display shows time and day when the
controller is idle. By pressing the Station button, you can check the
watering schedule for any station.
Station number
STATION
Seasonal
adjust
indicator
Keypad Definitions............................................
Increase or decrease all
SEASONAL
ADJUST watering times
Set current time and day,
TIME
DAY
AM/PM or 24 hour
Program a station for
STATION
automatic watering
Set time that Program A
START
and/or B will start
TIMES
watering
NO
Set days you don't want
WATER
watering to occur
DAYS
2 separate programs,
A and B
PROGRAM A
NEXT WATER WED
Next day
to water
Cycle lengths up
to 3 hours, 59 minutes
CYCLE TIME
Switch from Program A to
A B
Program B
Manually run a single
ONE
station
STATION
• Pause watering during
• Cancel a manual run
END
CANCEL
• Go back to time and day
Run an entire program
ALL
STATIONS
including all repeat cycles
Stop or restart automatic
program watering
Move blinking cursor left or
NEXT
LAST
right when programming
Increase or decrease numbers
when programming
No. of cycles per day
(up to 14 per program,
28 total per station)
CYCLES
PER DAY
DAYS
APART
Days between
waterings (up to 14)
automatic runs
display when programming
53