ESAB PT-31XL Manuel D'instruction page 82

sEctIoN 5
con-
complete
figura-
torch assembly
tion #
20084 - 3.8m (12 1/2') lines
20080 - 7.6m (25') lines
20082 - 15.2m (50') lines
1
21985 - 7.6m (25') lines
0558005393 -7.6m (25') lines
2
0558005334 -15.2m (50') lines
0558004482
3.8m (12 1/2') lines
3
0558001466
3.8m (12 1/2') lines
0558003467
7.6m (25') lines
Seat and o-ring. Consumables and plunger not
30A / 40A high performance "XT" consumables,
standard heat shield P/N 20282, seat, o-ring and
30A / 40A high performance "XT" consumables,
standard heat shield P/N 20282, seat, o-ring and
30A / 40A high performance "XT" consumables,
standard heat shield P/N 20282, seat, o-ring and
NotE: When ordering the PT-31XL torch
assembly for use on the HandyPlasma-380,
Female Torch Connector P/N 0558004947 shown
below must also be ordered.
30A / 40A high performance "XT" consumables,
long heat shield P/N 0558000509, seat, o-ring and
50A high performance "XT" consumables, long
heat shield P/N 0558000509, seat, o-ring and
table 5-1 pt-31 replacement torch and torch parts
Installed consumables
included.
plunger.
plunger.
plunger.
plunger.
plunger.
82
rEplacEMENt parts
plasma cutting
system
PCM 500i, Handy
Plasma-550 (Asia)
Powercut-650
HandyPlasma-380
CaddyCut
(Europe)
HandyPlasma-50
(Europe)