Language; Factory Settings; Software Update - TechniSat DIGITRADIO 585 Mode D'emploi

> Select [Time Updates] to determine whether time updates should be
automatic via DAB, FM or the Internet, or whether you would like to enter it
manually.
> To do so, select [DAB update], [FM update], [NET update] or [No update].
> Under the [Set format] option you can activate 12 or 24 hour format.
Confirm your selection with the OK button.
> Under [Set time zone], select the current time zone in your location.
> Under [Summertime] you specify whether summertime should currently be
active.

17.4 Language

> Press the MENU button and then select [Main Menu > System Settings >
Language].
If you are in a submenu, select the main menu as described in Section 7.1.
> Using  or , select the language and confirm the selection by pressing OK.

17.5 Factory settings

If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device
to factory settings to delete all the saved stations and then launch a new scan.
> Press the MENU button and then select [Main Menu > System Settings >
Factory Settings].
If you are in a submenu, select the main menu as described in Section 7.1.
> Confirm by pressing OK.
> Use  or  to select Yes and confirm the confirmation prompt by pressing
OK.
All previously stored stations and settings will now be deleted. After resetting,
you can start or skip the set-up wizard (Section 17.7).

17.6 Software update

From time to time software updates may be provided which may contain
improvements or bug fixes. This keeps the DIGITRADIO 585 permanently up-to-date.
DE
EN
FR
IT
NL
DA
PL
SK
SL
73