Setting The Track; Quick Search; Repeat Function; Audio Input - TechniSat DIGITRADIO 585 Mode D'emploi

Do not perform any operation until the CD content has been completely read,
to ensure that all the required information on the CD has been read. With
MP3 CDs in particular, this process can take some time.
To insert/remove the CD, please hold it by the edge.
> By pressing the Play/Pause
time appears in the display), or continue playback by pressing it again.
> Use the Stop
appears in the display.
Always stop the playback prior to removing the CD.

14.4 Setting the track

> Use the Previous Track
or previous track.
The display shows the respective folder ([F]) and track ([T]) number.

14.5 Quick search

While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track
skip forward or back within a track for as long as the button is held down.

14.6 Repeat function

You can select whether a track, the entire folder/album (only for MP3 CDs) or all of
the tracks on the CD are to be repeated.
> Press the Repeat
The selected mode appears in the display using an icon (Repeat Track,
Repeat Album, Repeat All, Shuffle).
> To switch the function off again, press the Repeat track button as often as
required until the icon no longer appears.

15 Audio input

You can play sound on an external device via the DIGITRADIO 585 speaker.
> Connect the external device to the AUX IN port (23, 3.5 mm jack) on the rear
of the device.
> Use the MODE button to select the audio input. [Aux In] appears in the
display.
68
button, you can pause playback (the playing
button to stop playback. The total number of tracks
or Next Track
button multiple times.
buttons to skip to the next
or Next Track buttons to quickly