Other Functions; Sleep Function; Alarm; Setting The Alarm Time - TechniSat DIGITRADIO 585 Mode D'emploi

The playback is controlled on the external device. Do not set the volume too
low to prevent distortion.

16 Other functions

16.1 Sleep function

> Press the MENU button and then select [Main Menu > Sleep].
If you are in a submenu, select the main menu as described in Section 7.1.
> You can use the  or  buttons to set the period for Sleep off in 15, 30, 45
or 60 minute intervals, after which the device switches to standby while in
any operating mode.
Alternatively:
> Press the SLEEP button several times.
A clock symbol appears in the status bar of the display with the time
remaining until the DIGITRADIO 585 switches to standby.

16.2 Alarm

> Press the MENU button and then select [Main Menu > Alarm].
If you are in a submenu, select the main menu as described in Section 7.1.
Alternatively:
> Press the Alarm 1 or Alarm 2 button to jump straight to alarm configuration.

16.2.1 Setting the alarm time

The alarm function cannot be operated until the correct time has been set.
Depending on the set-up, this either occurs automatically or has to be set
manually. The time can either be updated manually, via DAB / FM or via the
Internet. See Section 17.3 for further information.
> Select an alarm time memory (Alarm 1 or Alarm 2) using the  or  buttons
and confirm with OK.
Alternatively:
> Press the Alarm 1 or Alarm 2 button to jump straight to alarm configuration.
> Go through all the points one after the other. Confirm each entry with the OK
button.
DE
EN
FR
IT
NL
DA
PL
SK
SL
69