Setting Backlight; Setting Language; Factory Reset - TechniSat DIGITRADIO 20 Mode D'emploi

Set 12/24 hour format:
Set date format:
3. Then setting time according to your personal preference.

7.4 Setting Backlight

This feature enables you to adjust the brightness level of display.
1. Press MENU button, and then turn SCROLL/SELECT knob to select 'Backlight', press SCROLL/SELECT
knob to confirm.
2. Turn SCROLL/SELECT knob to select 'Power on' or ‚Standby', and then press SCROLL/SELECT knob to
confirm.
3. Turn SCROLL/SELECT knob to select backlight level, and then press SCROLL/SELECT knob to confirm the
setting.
Power on
Standby

7.5 Setting Language

This feature enables you to change menu language. The default menu language is German.
1. Press MENU button, and then turn SCROLL/SELECT knob to select 'Language', press SCROLL/SELECT
knob to confirm.
2. Turn SCROLL/SELECT knob to select your language, and then press SCROLL/SELECT knob to confirm.

7.6 Factory Reset

Doing a factory reset clears all user defined setting, replacing them with the original default values, so time/date,
DAB station list and preset stations are all lost.
1. Press MENU button, and then turn SCROLL/SELECT knob to select 'Factory Reset', press SCROLL/SELECT
knob to confirm.
'Set 24 hour' or 'Set 12 hour'
'DD-MM-YYYY' or 'MM-DD-YYYY'
Level 1, Level 2, Level 3, Level 4 or Level 5
Standby Off, Level 1, Level 2, Level 3, Level 4 or Level 5
EN
FR
IT
NL
NW
DK
PL
CZ
SK
19