Pairing; Playing Music; Audio/Playing Mp3 Cds; General Information On Cds/Mp3 Cds - TechniSat DIGITRADIO 585 Mode D'emploi

If the DIGITRADIO 585 has already been paired with another device which is
within range, the connection is automatically established.

13.2 Pairing

> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
If you activate Bluetooth on your music player, please consult the
corresponding instruction manual for the device which you wish to pair with
the DIGITRADIO 585.
Please note that only 1 device can be connected to the DIGITRADIO 585 at
any time.
Ensure that you do not exceed the maximum Bluetooth range of 10 metres
to guarantee excellent playback quality.
> Select the list of Bluetooth devices found on your music player.
> In the list, search for the item DIGITRADIO 585 and select it. If the selection
requires a PIN, enter 0000 (4 x zero).
> If the pairing has completed successfully, the [BT] symbol in the DIGITRADIO
display stops flashing.

13.3 Playing music

> Select a music track on your music player and play it.
> The sound is now played via the DIGITRADIO 585.
You can use the Play buttons on the DIGITRADIO remote control to control
the playback on your music player (only with compatible devices).
Ensure that the volume on your music player is not set too low.

14 Audio/Playing MP3 CDs

14.1 General information on CDs/MP3 CDs

The device is designed for music CDs that are played with audio data (CD-DA or
MP3 for CD-R and CD-RW). MP3 formats must be created with ISO 9660 Level 1 or
Level 2. Multi-session CDs cannot be read.
In MP3 mode, the terms "Folder" = Album and "Track" are critical. "Album"
corresponds to the folder on the PC, "track" to the PC file or a CD-DA track.
66