Info; Display Backlight - TechniSat DIGITRADIO 585 Mode D'emploi

After a search for available wireless networks you are shown the result.
> Select the wireless network you want and confirm the selection with OK.
Select [Skip WPS] to enter the password.
If it is a protected network you will be asked to enter the corresponding
access key.
> To do this, mark the respective character.
> Enter the selected character by pressing the OK button.
Proceed in this way until the complete access key can be seen in the input
field.
To cancel the entry, select
typing error you can delete the last letter entered using
> Then select
correct a connection to the network is now established.
> If [Set-up wizard completed] appears in the display, press the OK button.

17.8 Info

> Press the MENU button and then select [Main Menu > System Settings >
Info].
If you are in a submenu, select the main menu as described in Section 7.1.
> Confirm by pressing OK.
> The software version is shown.
> You return to the menu by pressing the MENU button.

17.9 Display backlight

It is possible to set the display brightness both for operation and standby.
> Press the MENU button and then select [Main Menu > System Settings >
Backlight].
If you are in a submenu, select the main menu as described in Section 7.1.
> Select [Operation] or [Standby] to apply the setting for operating mode or
standby mode.
and press the OK button. If you make a
and press the OK button. If the password entered is
.
DE
EN
FR
IT
NL
DA
PL
SK
SL
75