Antari WiFi-800 Mode D'emploi page 14

to activate the timer function. Adjust the interval between each fog emission (within the
range of 10 to 250 seconds) by means of the INTERVAL control knob. Adjust the duration
of each fog emission (within the range of 10 to 120 seconds) by means of the
DURATION control knob. When pressed, the green FOG button overrides all other
control functions and activates maximum output.
 Z-50: Wireless remote controller with 1/4 inch jack plug. A remote operation is possible
up to a distance of 50 meters in open area. Keep the red button pressed for fogging.

Z-10, Z-40, Z-50 Remote Controllers
 Performance Note
 All fog machines develop condensation around the output nozzle. Because this may
result in some moisture accumulation on the surface below the output nozzle, consider
this condensation when installing your unit.
 All fog machines may sputter small amounts of fog occasionally during operation and for
a minute or so after being turned off.
 Maintenance
Do not allow the fog liquid to become contaminated. Always place the caps back on the fog
liquid container and the fog machine liquid tank immediately after filling. After every 40 hours
of operation, it is recommended to use distilled water to run a cleaning process.
The recommended cleaning regimen is as follows:
14