Antari WiFi-800 Mode D'emploi page 10

Network Mode
Network Name(SSID)
Broadcast Network
Name(SSID)
AP Isolation
Frequency (Channel)
 Wireless Settings > Security
SSID choice
Security Mode
Select one of the following that meets your clients
11b/g mixed mode
11b only
11g only
11b/g/n mixed mode default
11n only(2.4G)
The name of your wireless network, create a name
for your wireless network using up to 32 characters.
Enable is default setting. If Disable is selected, the
SSID of the machine will not be seen. The wireless
client will have to know the SSID in order to connect
to it.
Preventing devices connected to AP from
communicating directly with each other. Default is
set to Disable.
Select transmitting frequency.
Select a SSID to start configuration
Choose one of the following mode for data
protection:
Disable
OPENWEP
WPA-PSK
WPA2-PSK
10