Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Telephone numbers assigned to All
Event will be marked with "X" at the
end in the telephone number menu.
Alarm Event – Only alarm event will
be reported.
Telephone
Alarm Event will be marked with "A" at
the end in the telephone number
menu.
Status Event – Only system status
event will be reported.
Telephone
Status Event will be marked with "S"
at the end in the telephone number
menu.
Account No.
The Account Number setting option is used to
program your CID and SMS report setting.
A ) . . .
B ) . . .
C ) . . .
D ) . . .
E ) . . .
F ) . . .
1. Select the account number you want to
program and press "OK" to confirm. The
alphabetical order corresponds to the
reporting numbers set in Tel. Numbers.
2. Enter the account number according to your
reporting number setting and press "OK" to
confirm.
CID reporting:
Enter a 4-digit account number (numerical 0-9
or aphabatical B-F). If no account number is
entered, the Control Panel will not report to this
telephone number as the setting is incomplete.
SMS reporting:
Enter a 4-digit account number (numerical 0-9
or aphabatical B-F). If an account number is
set, the SMS report reports in CID format. If an
account is not set, the SMS report reports in
Text format instead of CID.
Record Msg
This function allows you to edit/record your
address message for Voice Report, the
8
numbers
assigned
numbers
assigned
maximum length of the message is 10 seconds.
Address message will be played when the
system dials to telephone number to notify the
receipient of your address.
1. If no message was previously recorded, the
display will show "Start Recording After the
to
Beep"
If you have already recorded a message, the
display will ask you to confirm if you want to
change the message, press "OK" to confirm.
2. After 2 seconds, the Control Panel will
sound one beep, you can now start to record
to
the message
3. Speak clearly and slowly for the Control
Panel to record your address. When you
finish recording, press "OK" to stop
recording, the recording will automatically
stop when it reaches 10 second.
<
N
O
T
E
>
<
N
O
T
E
>
The default address message is
"Alarm System."
Test Report
This function allows you to test whether
telephone function is working properly or not
with the pre-set telephone numbers.
1. Preset telephone numbers will be displayed,
select the telephone number you want to
test and press "OK" to confirm.
2. The Control Panel will dial the telephone
number:
3. For Voice Report telephone numbers, upon
successful connection, the Panel will play
pre-recorded voice messages one by one
for 85 seconds before hanging up. The
messages include:
Address Message
Emegency Message
Fire Message:
Burglar Message
Medical Message
The call recipient can end the call by
pressing DTMF #9 or hang up the telephone.
4. For SMS Report telephone number, a SMS
test report message will be sent. The SMS
message will display "Panel Test Report".
Publicité
Chapitres
Table des Matières
