Elkron CR200 GPRS Notice D'installation page 24

You will return to Panel Selection menu,
the new panel you entered will be
displayed, select the panel to proceed to
edit SMS commands for the panel.
If you want to remove the panel, press
"Remove."
Press the icon, then "Delete" to remove
the panel from the application.
24
<IMPORTANT NOTE>
The default setting in the application
may be different from the setting in
your Control Panel. When you use
the application to
system for the first time, please
check both application and Control
Panel settings for discrepancies.
If there are discrepencies, please
enter the correct setting in the
application, and press "Save" to
send the setting to Control Panel.
After you send an SMS command,
please make sure you receive
confirmation message from the
Control Panel before proceeding to
send the next command. If you
receive an error message from the
Control Panel, please resend the
SMS command again, or change
the setting back to previous setting
and save again. Otherwise the
setting saved in the application will
be different from the panel setting.
program the