Special Settings - Elkron CR200 GPRS Notice D'installation

Master Code
The Master Code is used to access the
Programming Mode for system setting.
To change the Master Code, enter the new
4-digit code and press OK.
Master Code factory default is set as 1111.
Entry Time
When a Door Contact (DC) or PIR Detector (IR)
set to Entry attribute is triggered when the
system is under Away Arm or Home Arm mode,
the system will begin a countdown timer
according to Entry Time setting. The system
must be disarmed within before the Entry Time
expires, or an alarm will be triggered.
Options available are: Disable (alarm
immediately), 10 sec., 20 sec., up to 70
sec. in 10-sec increments.
20 sec. is set as factory default.
Exit Time
When the system is Away Armed or Home
Armed, the system will begin a countdown
timer according to the Exit Time setting. When
the countdown timer expires, the system will
enter the selected Arm Mode. The user must
leave the premises before the timer expires.
Options available are: Disable (exit timer
prohibited), 10 sec., 20 sec. up to 70 sec.
in 10-sec increments.
30 sec. is set as factory default.
Door Chime
This function allows you to decide whether the
Control Panel should chime when a Door
Contact or PIR Detector set to Entry is
triggered under disarmed mode.
Options available are : High, Low, Off
Door Chime Off is set as factory default.
Time
This is for you to program the current time to
be displayed. (Hour & minute)
Use & and OK keys to set the Hour
and Minute
Press OK to confirm.
Date
This is for you to set the current date.
10
Use & and OK keys to set the Month
and Day
Press OK to confirm.
< N O T E >
< N O T E >
The panel will also adjust time and
date automatically through GSM Base
station regularly.
Panel Siren
This is for you to turn on/off the Control Panel's
built-in siren.
Use & and OK keys to select On or Off.
Press OK to confirm.

3.5. Special Settings

The Special Setting allows you to set specific
configuration for the system.
A l a r m
E x i t
E n t r y
F i n a l
I n t e r f e r e n c e
C h e c k - i n
O f f s e t
F o l l o w
S u p e r v i s i o n
H . T e m p e r a t u r e
L . T e m p e r a t u r e
S I M U n l o c k
L a n g u a g e
Alarm Length
This is for you to select the length of time siren
should sound when an alarm is activated. You
can choose from 1 min. to 15 min. in 1-min
increments or to disable the siren.
Options available are: 1~15 minute in 1-
minute increment.
3 minutes is set as factory default.
Exit Sound
This is for you to decide whether the Control
Panel should sound count-down beeps and
volume of beep during Exit Time
Options available are: High, Low, Off
Exit Snd Lo (Exit sound Low) is set as
factory default.
L e n g t h
S o u n d
S o u n d
D o o r
R p t
P e r i o d
O n