Elkron CR200 GPRS Notice D'installation page 13

following codes in the system:
Door Contact ---- DC
PIR Sensor ----- IR
External PIR --- EIR
Remote Controller --- RC
Remote Keypad ---KP
Smoke Detector --- SD
Water Sensor --- WS
Indoor Siren --- SR
Outdoor Siren --- BX
Night Switch --- NS
Temperature Sensor – TS
Repeater – RP
<IMPORTANT NOTE>
For Indoor Siren and Outdoor
Bellbox, the confirmation sound for
mode change and warning beep
during Entry/Exit time can only be
programmed through SMS remote
command.
Remote Command and Control
and 6. CR200
Application for detail.
For entering device name with numeric
keypad, please refer to the following table.
1 1
2 2ABCabc
3 3DEFdef
4 4GHIghi
5 5JKLjkl
6 6MNOmno
7 7PQRSpqrs
8 8TUVtuv
9 9WXYZwxyz
0<space>/-
0
&'."+:
The devices are displayed in the system
according to the following format:
Zone number
Device type
PIR Zone 03 B
Please refer to
GPRS Home
Delete
character
backspace
Zone attribute
Edit Device
Use Edit Device to change setting fore learned
in devices. The screen will display available
devices.
1. Select the device you want to edit, press
"OK" to confirm.
2. For Door Contact, PIR sensor and EIR
sensor, you will be asked to edit the
attribute, please refer to Add Device for
detail.
3. You will then be asked to enter the device
name, please refer to Add Device for detail.
Remove Device
This function is used to remove an existing
device form the system.
1. Select the device you want to remove, press
"OK" to confirm.
2. You will be asked to confirm your action,
press "OK" to confirm.
3. The device will be removed from the system.
5.
Program Siren
If an outdoor Bell Box, Indoor Bell Box or
Universal Receiver etc. is to be included in the
system, it should be programmed first by the
Control Panel, so that the Control Panel can
communicate with these auxiliary devices.
To program these auxiliary devices, select
Program Siren in the Device +/- menu.
and
Learn Siren
If any detector or Remote Controller has been
added already:
Step 1. Put all the desired Auxiliary devices
into learn mode (Refer to their
individual Operational Manual).
Step 2. Move the cursor to the position Learn
Siren.
L e a r n S i r e n
S i r e n T a m p . O n
S i r e n T a m p . O f
C o n f i r m O n
C o n f i r m O f f
E n t r y S n d
E n t r y S n d
O n
O f f
13