ESAB CC-11 Manuel D'instruction page 63

SECTION 3
WARNING
Input Power Cable
ELECTRIC SHOCK CAN KILL! BEFORE MAKING ELECTRICAL INPUT
CONNECTIONS TO THE POWER SOURCE, "MACHINERY LOCKOUT
PROCEDURES" SHOULD BE EMPLOYED. IF THE CONNECTIONS
ARE TO BE MADE FROM A LINE DISCONNECT SWITCH, PLACE THE
SWITCH IN THE OFF POSITION AND PADLOCK IT TO PREVENT IN-
ADVERTENT TRIPPING. IF THE CONNECTION IS MADE FROM A FUSE
BOX, REMOVE THE CORRESPONDING FUSES AND PADLOCK THE
BOX COVER. IF IT IS NOT POSSIBLE TO USE PADLOCKS, ATTACH A
RED TAG TO THE LINE DISCONNECT SWITCH (OR FUSE BOX) WARN-
ING OTHERS THAT THE CIRCUIT IS BEING WORKED ON.
Typical Installation -
User-supplied single phase fused power disconnect box with
receptacle and plug
Figure 3.3 Input Connection Diagram
63
INSTALLATION