GB
Instructions For Use Machine Light MC(X,T,B)FL 3 N „SPOT LED 003"
Operation
Fig. 16
16.1
24
Switching the
light on and off
Lights with switch
(See Fig. 16)
The light is switched on and off by
means of the switch [16.1] located
on top of the light head.
Lights without switch
The light is switched on/off via
external circuit elements or con-
nectors.
Adjusting the
articulation joints
The joints are adjustable.
Each joint must be adjusted such
that the light is - on the one hand
- easily movable and - on the oth-
er hand - remains in the position
desired by the user.
! CAUTION
Hazard to man and material
caused when light tilts!
Articulation joints adjusted wrong-
ly may cause the light to tilt!
Adjust each articulation joint
¾
such that the adjustment can-
not change by itself.