Maintenance And Repair - Waldmann SPOT LED 003 Mode D'emploi

GB Instructions For Use Machine Light MC(X,T,B)FL 3 N „SPOT LED 003"

Maintenance and repair

! WARNING
Danger due to electrical shock
in case of contact!
Maintenance or repair work carried
out incorrectly may result in serious
injuries or death.
Disconnect the light from the
¾
mains before carrying out any
maintenance or repair work!
Maintenance and repair work
¾
must be carried out by a skilled
electrician only!
Only parts released by the
¾
manufacturer may be used as
spare parts!
Fig. 17
LED
Defective light source
The light works with light
emitting diodes (LED). The
useful life of LEDs exceeds by
far that of conventional lamps
(e.g. light bulbs). Therefore, a
light source replacement is rarely
necessary.
If nevertheless one of the three
LEDs should break down, the
entire LED module [Fig. 17] must
be replaced. To this end, the com-
plete light should be sent to the
manufacturer.
25