Preparation - Westfalia SI066 Notice De Montage

SIARR
11 - 104

PREPARATION

* Remove the tail lights.
* Remove the bumper :
° each side :
° Pull away the rim of the rear fender, then remove the bumper clip.
° 2 screws at the end of the fender, 2 screws under the tail lights, 4 screws under the bumper.
° 2 screws behind the license plate (remove the rivets).
* Make the cut under the bumpers as scribed.
ASSEMBLY
* Attach without tightening the attachment arms A and B to
the inside of the rails at points W-X using screw sets W and X.
* Attach without tightening the hitch assembly to points V-W
using screw sets V and W.
FINISHING
* Tighten all screw sets as indicated in the following order: X – W – V.
* Reassemble the elements previously removed.
* Attach the hitch head at point Y as well as the electrical support using its screw set.
FASTENING KIT
2 HM10x35 screws cl8.8
2 10,5/35 plain washers
W
2 DEC10 washers
2 HM10 nuts cl8.8
2 HM10x35 screws cl8.8
2 10,5/35 plain washers
X
2 DEC10 washers
2 HM10 nuts cl8.8
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 HM10x30 screws cl8.8
V
2 DEC10 washers
2 HM16x45 screws
Z
2 DEC16 washers
2 HM16 nuts
2 HM12x60 screws
Y
2 DEC12 washers
2 HM12 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Type Type
SI066 Approval No.
Tow bar for
VW Tiguan e24*94/20*00*0100
(Standard)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM11\NDM11104-B - FOLIO NDMANG
321745600001
Max. Total Max. Total
Authori. Weight Towable Weight
2 500 kg 2 240 kg
Max. Verti- Value
cal load D
100 kg 11,59 kN