Preparation - Westfalia 342116600001 Notice De Montage

SIARR
06 - 102

PREPARATION

* Remove the step plate.
ASSEMBLY
* Fasten the step plate to the points marked Y and U
on the tow bar, and if necessary insert the adjusting
shim D at the points marked Y.
* Position the strengthening pieces B and C inside
the longitudinals, counter drill, if necessary, any
points that do not already exist on the vehicle.
* Position the tow bar beneath the vehicle and
fasten it in place using fastening kits V and Z.
FINISHING
* Tighten all of the nuts, bolts and screws
to the torques indicated below.
FASTENING KIT
2 off HM8x25 screws
U
2 off CS8 washers
2 off HM8 nuts (Nylstop)
6 off HM12x30 screws
V
6 off HM12 nuts
6 off CS12 washers
2 off HM16x45 screws
X
2 off HM16 nuts
2 off DEC16 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
4 off HM8x25 screws
Y
4 off CS8 washers
1 off ring shim
4 off HM12x30 screws
4 off HM12x60 screws (if necessary)
4 off CS12 washers
Z
4 off spacers dia. 17/21 Lg. 28mm
(if necessary)
4 off HM12 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Type Type
Approval No.
Tow bar for
IVECO Daily e11*94/20*01*2370
Van
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDM06\NDM06102-E - FOLIO NDMANGLAIS
342116600001
Max. Total Max. Total
Authori. Weight Towable Weight
3 500 kg 3 500 kg
Max. Verti- Value
cal load D
150 kg 18,39 kN