Preparation - Westfalia 315140600001 Notice De Montage

SIARR
03 - 69

PREPARATION

* Drop the exhaust down.
* Remove the heat shield.
ASSEMBLY
* Put the 4 cage nuts in place in the longitudinals at the points marked X.
* Fasten the right arm B and the left arm C to the points marked X and V
using fastening kits X and V.
* Fasten tow bar A with arms B and C to the points marked Y using fastening kit Y.
FINISHING
* Tighten all of the nuts, bolts and screws to the torques indicated below.
* Refit the heat shield and the exhaust.
NB : FOR THE 406 COUPE, order kit ref. 8560.
* The angles brackets from the kit fix to the ends of the tow bar crosspiece
to replace the securing brackets from the bottom of the bumper.
FASTENING KIT
2 off HM12x35 screws
2 off 12 plain washers
V
2 off CS12 washers
2 off M12 cage nuts
2 off HM16x45 screws
W
2 off DEC16 washers
2 off HM16 nuts
2 off HM16x45 screws
Z
2 off DEC16 washers
2 off HM16 nuts
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
4 off HM10x35 screws
4 off CS10 washers
X
4 off 10-27 plain washers
4 off M10 cage nuts
4 off HM10x35 screws
4 off CS10 washers
Y
4 off 10-27 plain washers
4 off HM10 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM0369-B - FOLIO NDMANG
Type Type
Approval No.
Tow bar for
Peugeot 406 e11*94/20*00*0328
Saloon
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
315140600001
!
!
Affix the sticker in the position
Max. Total Max. Total
Authori. Weight Towable Weight
2 340 kg 1 200 kg
Max. Verti- Value
cal load D
80 kg 7,78 kN