Preparation - Westfalia 307376600001 Notice De Montage

SIARR
08 - 99

PREPARATION

* Remove bumpers, then remove and eliminate the two
fixing leads holding the bumpers (point W).
ASSEMBLY
* Take and screw, without tighthening, the fixing arms A and B
to point W, insert at the extremity of the arms the welded
strip (C) to point X with the assembled screws
* Fix the device to points U-V with assembled screws U-V.
* Remount the bumpers to point Y using screw Y
* Tighten the whole to the frame indicated here below in
the following, order : W - X - U - V - Y.
FASTENING KIT
2 off HM12x40 screws
U
2 off DEC12 washers
2 off HM12x40 screws
V
2 off DEC12 washers
2 off HM12 nuts
4 off HM12x35 screws 150
W
4 off DEC12 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 welded strips (C)
X
2 off HM12 nuts
2 off DEC12 washers
4 off HM8x20 screws
Y
4 off HM8 nuts
4 off DEC12 washers
2 off HM16x45 screws
Z
2 off DEC16 washers
2 off HM16 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Affix the sticker in the position
!
Type Type
SI041 Approval No.
Tow bar for
Ford Ranger II et e24*94/20*00*0071
Mazda BT50
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM08\NDM0899-A - FOLIO NDMANG
307376600001
Max. Total Max. Total
Authori. Weight Towable Weight
3 070 kg 3 000 kg
!
Max. Verti- Value
cal load D
150 kg 14,88 kN