Preparation - Westfalia 342115600001 Notice De Montage

SIARR
06 - 101

PREPARATION

* Remove the bumper securing screws.
ASSEMBLY
* Position strengthening pieces B and C
in the longitudinals, then fasten them to
the point marked Z using fastening kit Z.
* Fit the tow bar to the point marked V
using fastening kit V.
FINISHING
* Tighten all of the nuts, bolts and screws
to the torques indicated below.
FASTENING KIT
6 off HM12x30 screws
V
6 off CS12 washers
6 off HM12 nuts
2 off HM16x45 screws
X
2 off HM16 nuts
2 off DEC16 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
6 off HM12x30 screws or
6 off HM12x60
screws (if necessary)
Z
6 off HM12 nuts
6 off CS12 washers
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM06101-F - FOLIO NDM ANGLAIS
Type Type
Approval No.
Tow bar for
IVECO Chassis e11*94/20*01*2370
Cabin
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
342115600001
Max. Total Max. Total Max. Verti-
Authori. Weight Towable Weight
cal load
5 000 kg 3 000 kg
Value
D
250 kg 18,39 kN