SIARR
04 - 155
PREPARATION
* Detach the plastic protector under the vehicle.
* Make a cut in the protector as in close-up 1.
ASSEMBLY
* Insert the spacers D, with their bolting, inside
the side-members at point X on the vehicle.
* On the inside of the side-members, mount the arms A and B
at point X, insert the washers C between the side-members and
arms, and then fasten, without tightening, with bolting block X.
* Mount the coupling unit, and then fasten it, without
tightening, at points V – W using bolting kits V – W
FINISHING
* Tighten everything to the torques indicated
below and in the following order : X – V – W.
* Refit the plastic protector.
FASTENING KIT
4 HM12x110 cl8.8 screws
4 DEC12 washers
4 HM12 cl8.8 nuts
X
4 12,5/30 thickness 5mm (C) plain washers
4 12,5/30 plain washers
4 20/32 thickness 10mm rubber washers
4 dia.12,5/22 Lg.70mm (D) spacers
2 HM10x35 cl8.8 screws
W
2 DEC10 washers
2 HM10 cl8.8 nuts
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
!
2 HM10x30 cl8.8 screws
V
2 DEC10 washers
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
Affix the sticker in the position
Type
Type
SI064
Approval No.
Towbar for
Renault Laguna III e24*94/20*00*0094
Saloon (RDSO)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM04\NDM04155-B - FOLIO NDMANG
316262600001
Close-up 1
Max. Total
Max. Total
Authori. Weight Towable Weight
2 200 kg
1 500 kg
Max. Verti-
Value
cal load
D
75 kg
8,80 kN