Medela Sonata Double Pump Kit Mode D'emploi page 17

2
• Carefully insert the (dark yellow)
membrane into the top of the
connector body.
• The membrane must be secure for
correct assembly.
5
Fasten the bottle onto the complete
breast shield assembly.
8
Insert the long tubing end into the
breast pump as far as it will go.
Questions? 1-800-435-8316 | info@medela.ca
3
Press the connector cap onto the
connector body. It will snap closed.
6
Push breast shield onto the
connector body.
Accurately assembled system.
Snap
17