BEA LZR-MICROSCAN Mode D'emploi page 2

PRECAUTIONS
Shut off all power going to header before attempting any wiring procedures.

Maintain a clean & safe environment when working in public areas.

Constantly be aware of pedestrian traffic around the door area.

Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by

the door.
ESD (electrostatic discharge): Circuit boards are vulnerable to damage by electrostatic discharge. Before handling

any board ensure you dissipate your body's ESD charge.
Always check placement of all wiring before powering up to ensure that moving door parts will not catch any wires

and cause damage to equipment.
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of installation.

DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be per-

formed by BEA, Inc. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product resulting in a voided warranty.
LASER
IR laser (Class 1); wavelength 905 nm; max. output pulse power 35 W
CAUTION: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure
INSTALLATION
Avoid extreme
vibrations.
MAINTENANCE
It is recommended to
clean the opitcal parts
at least once per year
or more if required
due to environmental
conditions.
SAFETY
The door control unit
and the door header
must be correctly
grounded.
Page 2 of 12 Page 2 of 12
Do not cover the
sensor.
Do not use
abrasive cleaning
components.
Only trained and
qualified personnel
may install and setup
the sensor.
Avoid moving objects
and light sources in
detection zone.
Always test the proper
operation of the
installation before
leaving the premises.
75.5753.10 LZR-MICROSCAN 20170310 75.5753.10 LZR-MICROSCAN 20170310
CLASS 1
LASER PRODUCT
Avoid highly
reflective objects in
the detection zone.
The warranty is void
if unauthorized
repairs are made
or attempted by
unauthorized
personnel.