Decommissioning And Storage; Decommissioning; Storage - Gloria WEEDBRUSH Mode D'emploi

Masquer les pouces Voir aussi pour WEEDBRUSH:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

scope of delivery) to push the safety
guard locking device (M) to the cen-
tre of the device, as illustrated. Keep
the safety guard locking device
pressed down and pull the safety
guard (L) upwards.
11
Now press the lock button (J) which
blocks the drive shaft and unscrew the
hexagon socket screw, which fixes the
joint brush (K), from the drive shaft
(CAUTION! LEFT-HAND THREAD
Remove the disc from the joint
brush.
ATTENTION
Improper use of the device poses a risk
of damage to property! You should
therefore observe the following safety
instruction:
Never activate the lock button (J)
when the joint brush is running.
12
Pull the joint brush (K) from the flange
on the shaft and exchange it for a new
one.
13
Assembly is carried out in reverse order
(
).
After maintenance or cleaning ensure
that all screws, bolts, nuts and safety
devices are secure and assembled.
14
Turn the safety guard (L) by 90° and
slide it on to the new joint brush. Now
turn the safety guard 90° to the front
and the safety guard locking device (M)
will automatically lock into position.
8

Decommissioning

& Storage
8.1 Decommissioning
Figure 15
Take the device out of operation by
releasing the ON/OFF safety switch (D)
in the handle.
ATTENTION
Improper use of the device poses a risk
of damage to property! You should
therefore observe the following safety
instruction:
To
prevent
remove battery from device when
not in use for a prolonged time. For
this purpose, remove battery from
adapter.
CAUTION
RISK OF INJURY FROM RUNNING
BRUSHING TOOL!
).
Never lift the device off the ground
whilst switching it off as there is dan-
ger of entanglement!
15
Do not put the device down on the
brush during work breaks or after use
as this will damage the bristles.
Always hang the device up or lie it
down as shown in the illustration.

8.2 Storage

CAUTION
You may be exposed to hazards that
could injure you when handling the
device. You must therefore store the
device away from children.
Remove any dirt and debris.
Store the device hung up, dry and
protected from frost.
8.2.1 Correct battery storage
It is essential that you also follow the
"Safety instructions for handling
charger and battery" in chapter
"Important safety instructions".
ATTENTION
Improper use of the device poses a risk
of damage to property. The battery
should not be stored uncharged.
Though self discharge is minimal, an
empty battery can be destroyed if
stored for an extended period. Thus,
observe the following instructions if not
in use for an extended period (e.g. dur-
ing winter):
store battery at a charge status of
approx. 40 - 60 %.
store battery in a dry, elevated, closed,
frost-protected space at a temperature
between 0 °C and + 45 °C. When stor-
27
battery
discharge,

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

000288.0000Weedbrush

Table des Matières