4
Technical data
WeedBrush li-on
Set – Item number(s):
(battery and charger not included)
Battery (NOT included in item 000288.0000)
Type:
Nominal voltage:
Rating:
Charging station (AL 1810 CV) (NOT included in item 000288.0000)
Input:
Output:
Battery charging time (100%):
Per. charging temp. range:
Protection class:
(These following rights apply to the AL 1810 CV charger)
Dimensions & Rotational speeds
Rotational speed of joint brush:
Device width:
Device height:
Ø of joint brush:
Device weight with joint brush:
Protection class:
5
Assembly
Figures 1 - 4
NOTE!
1
Your device is supplied with the joint
brush pre-assembled. Loose parts
supplied
must
accordingly when working with the
joint brush.
After removing from the packaging,
assemble both parts of the tubes (G)
together, as illustrated
assembling, make sure that the
attachment lug fits into the groove as
illustrated to ensure that both tubes
(G) are in the correct position and the
handle (A) is aligned correctly.
Now tighten the screw connection (F)
by hand by turning it clockwise.
As the device should always be
guided and operated with two hands,
fit the additional handle (E) as shown
3
in the figure
, adjust the height
000288.0000
Lithium-ion (Bosch PBA 18V 4.0 Ah)
18.0 V
4.0 Ah
220-240 V~ / 50/60 Hz
14.4-18.0 V / DC / 1.0 A
244 Min.
0 – + 45 °C
II
1800 rpm
23 cm
117 cm
11 cm
2.0 kg without battery / 2.7 kg with battery
II
be
as sembled
2
. When
24
24
and screw the additional handle (E)
4
tightly into place
6
Prior to initial commissioning
WARNING
BEFORE USE OBSERVE CHAPTER 2 "FOR
YOUR SAFETY". You should therefore
observe the following safety instruc-
tions:
The mains voltage must be in com-
pliance with the voltage specifica-
tion (V~) on the type plate of the
charger.
Operate charger only in dry rooms.
NOTE!
Before initial use, fully charge battery
(C). Please ensure that the charging
procedure is performed at room tem-
perature. This is the only way to ensure
a long battery life.
A significantly decreased runtime in
spite of charging indicates that the bat-
.