Parkside PSHL 2 A1 Traduction Du Mode D'emploi D'origine page 8

Safety instructions
The response time of the ADF
„ z
liquid crystal slows down if the
ambient temperature is lower,
however this does not have
an impact on the protective
functions.
Please replace the housing of
„ z
the ADF filter immediately if it is
damaged or scratched because
this can impair visibility and the
protective performance.
Please replace the viewing
„ z
pane immediately if it is broken
or scratched. Do not use any
hard objects to replace the
viewing pane of the filter.
Regularly clean the surfaces
„ z
of the ADF filter, sensor and
solar cells.
The welding helmet cannot
„ z
withstand any damages that
are caused by a heavy blow,
explosion or abrasive liquids.
The useful life depends on many
„ z
different individual factors such
as usage, cleaning, storage
and maintenance. Regular
inspections and replacement
in the case of damage are
recommended.
The material used to manufac-
„ z
ture the product will age over
time. This can result in break-
ages on the welding helmet, for
example. As a result of these
8 GB/IE/NI
damages, the welding helmet
is no longer able to provide
effective protection. In this case,
the user should replace the
welding helmet immediately.
This product cannot be used
„ z
for overhead welding work
and cutting operations. If this
product is use for overhead
welding or cutting, the molten
metal drops could burn through
the ADF filter and result in
injuries to the user.
If the filter is faulty, the user must
„ z
stop using the welding helmet
immediately. Slag splashes can
damage the surface of the filter
and cause injury to the user's
skin or cause other serious
accidents.
This product is temperature
„ z
resistant and hardly inflammable
but in case of direct contact
with naked flames or in case of
access to an object with a high
temperature, the helmet may
begin to burn or melt. Please
store and only use the welding
helmet in the manner described
in order to reduce such risks.
The ADF filter is an electronic
„ z
product that is not waterproof.
Please ensure it is kept dry and
clean and not stored in a damp
environment.